حامل كابل سلم الحريق (1)
X
حامل كابل سلم الحريق (1)

علبة الكابلات من نوع السلم المقاومة للحريق

الفئة:

اتصل الآن

Dimensions (Width × Height, unit: mm):
(1) Height 50 Series: 100×50, 150×50, 200×50, 300×50, 400×50
(2) Height 100 Series: 100×100, 150×100, 200×100, 300×100, 400×100, 500×100, 600×100, 800×100
(3) Height 150 Series: 200×150, 300×150, 400×150, 500×150, 600×150, 800×150, 1000×150
(4) Height 200 Series: 300×200, 400×200, 500×200, 600×200, 800×200, 1000×200, 1200×200
(5) Extra‑long Span / Special Widened Cable Tray for Power Plants: 1000×100, 1000×150, 1000×200, 1200×200

Plate Thickness (unit: mm): 1.0/1.2/1.5/2.0/2.5/3.0/3.5

Ⅰ. Product definition
يتم تعريف المنتج على أنه حامل كابل من النوع السلمي المقاوم للحريق، ويتكون بشكل أساسي من عوارض طولية مزدوجة الجوانب من الفولاذ الكربوني Q235 وهيكل سلم ملحوم بدرجات مجوفة. بعد القولبة، تخضع للجلفنة بالغمس الساخن/الجلفنة الكهربائية للحماية من التآكل، ثم يتم رشها بطبقة منتفخة مقاومة للحريق. إنه يأتي مع أغطية مقاومة للحريق ومجموعة كاملة من الملحقات المقاومة للحريق، مما يوازن بين الوظائف المزدوجة لتبديد الحرارة الفعال للكابلات ذات التيار العالي ومقاومة الحريق لمكافحة الحرائق. لقد تم تصميمه خصيصًا لمشاريع الأسلاك ذات متطلبات الحماية من الحرائق، والتي تتضمن في المقام الأول كابلات الطاقة عالية الجهد.

II. Two Major Product Process Types
1. Conventional Coating Type Ladder Frame Forming: Steel plate bending and edge rolling, ladder rung stamping and full welding, with ladder rung spacing of 150/200/300mm; Base Anti-corrosion: Hot-dip galvanizing treatment, with a zinc coating thickness of ≥65μm, providing a rust-proof base; Fire-resistant Spray Coating: Overall spraying of intumescent fire-resistant coating, followed by drying and curing; F60 fire-resistant dry film thickness ≥0.8mm; F90/F120 dry film thickness ≥1.2~1.5mm; Fire-resistant Principle: Upon exposure to fire at 200/300℃, it expands 5/10 times, forming a honeycomb-like dense carbonized thermal insulation layer, which isolates high temperatures and protects the internal cables from power interruption within a specified time period.

2. Double-layer composite high-fire-resistant model (dedicated for tunnels/shafts) features side panels made of double-layer steel plates, with the interlayer filled with aluminum silicate fireproof insulation cotton. This significantly enhances the heat insulation performance, achieving a fire resistance limit of up to 90/120 minutes, making it suitable for enclosed and high-fire-resistance scenarios.

III. The entire set of supporting fire-resistant accessories undergoes unified fire-resistant treatment, with no fire-resistant shortcomings:
1. الملحقات المباشرة: موصلات مقاومة للحريق، ومسامير مقاومة للحريق، وأسلاك توصيل مضفرة للتأريض؛ 2. الأجزاء ذات الشكل الخاص: الانحناءات الأفقية 90 درجة، الانحناءات الأفقية 45 درجة، الانحناءات الرأسية لأعلى ولأسفل، المحملات، الصلبان، والمخفضات؛ 3. الأجزاء الوظيفية: ألواح التغطية المقاومة للحريق، ألواح التقسيم المعدنية، وألواح التقسيم المقاومة للحريق؛ 4. نظام الدعم: أذرع دعم مقاومة للحريق، أعمدة مقاومة للحريق، دعامات وشماعات زلزالية (إلزامية للأعمدة والأنفاق).

IV. Core Advantages
1. Optimal heat dissipation performance, with a hollowed-out and fully transparent structure suitable for high-current heating cables, ensuring sufficient air convection. Compared to fire-resistant trough-type cable trays, the temperature rise is reduced by 10~15℃, perfectly solving the problem of heat accumulation and aging caused by dense laying of high-voltage and large-section cables.

2. It possesses formal fire resistance performance, meeting fire safety inspection standards. The fire-resistant coating forms a thermal insulation barrier when exposed to fire, ensuring that the cable tray does not soften or collapse during a fire. This guarantees continuous power supply to power cables such as fire pumps, smoke exhaust fans, and emergency lighting. A third-party fire safety inspection report can be provided.

3. The hollow structure features light weight, strong load-bearing capacity, and lower cost, using less material than the fire-resistant trough type, and is labor-saving in lifting and transportation. The double-layer crimping + fully welded ladder rungs provide mechanical stability, and the thickened model can support a uniform load of up to 450kg/m, suitable for centralized laying of heavy-duty high-voltage cables.

4. The wiring maintenance is convenient with an open structure, eliminating the need for frequent disassembly of cover plates. The laying, inspection, and addition or removal of cables are visually intuitive, reducing maintenance man-hours in the later stages.

5. Dual protection against corrosion and fire: The bottom layer is hot-dip galvanized for rust prevention, while the outer layer is coated with a fire-resistant material that is resistant to water, oil, mild acids and alkalis. It can be directly used in damp basements and lightly corrosive workshops.

Ⅴ. Applicable Scenarios:
1. العمود الفقري للطاقة ذات الجهد العالي للحماية من الحرائق في محطات الطاقة والمحطات الفرعية ومحطات الطاقة الكهروضوئية/طاقة الرياح؛ 2. المنشآت الصناعية والجراجات تحت الأرض وغرف التوزيع، حيث تولد الكابلات كميات عالية من الحرارة وتتطلب متطلبات الحماية من الحرائق. 3. خطوط توزيع الطاقة في مراكز التسوق الكبيرة والمستشفيات والمطارات، وتتكون بشكل أساسي من كابلات الطاقة؛ 4. ممرات التوزيع في ورش العمل ومحطات معالجة مياه الصرف الصحي ذات التآكل الخفيف (الجلفنة بالغمس الساخن + الحماية المزدوجة من الحرائق)؛ 5. تقسيم كابلات الطاقة في الأنفاق وأنفاق الخدمات (تستخدم مع الأغطية الداعمة المقاومة للحريق).

VI. Key Points of Construction and Installation Specifications
1. All cutting, grinding, and drilling sections should be immediately coated with fire-resistant patching compound to restore the complete fire-resistant and heat-insulating layer;
2. Support arms, columns, and connecting bolts should be uniformly equipped with fire-resistant galvanized parts, and the mixed use of ordinary non-fire-resistant accessories is prohibited;
3. Each section of cable tray should be installed with grounding jumper wires, and repeated grounding should be added to shafts and tunnels to ensure overall equipotential continuity;
4. Metal separators must be installed when laying strong and weak electrical cables in the same ladder; fire-resistant covers should be added throughout the entire process for dust, pipe racks, and shafts;
5. For heavy-duty cable trays with a width of over 600mm, support arm support points should be densified to control deflection and deformation under long-term load;
6. High-rise shafts, tunnels, and long-distance fire main lines should be equipped with seismic support hangers according to specifications; 7. Cable trays passing through walls and floor slabs should be equipped with fire-resistant sealing materials to block the spread of flames and smoke.

طلب الاستعلام

معلومات عنا

نحن شركة متخصصة في تصنيع حوامل الكابلات ومقرها في مدينة Cangzhou، مقاطعة Hebei، الصين، مع سنوات من الخبرة في مجال البحث والتطوير في حوامل الكابلات، الإنتاج والتخصيص. تم تجهيز مصنعنا بورش عمل موحدة حديثة ومجموعات كاملة من معدات الإنتاج الأوتوماتيكية وأنظمة فحص الجودة الكاملة. من خلال الاستفادة من المجمع الصناعي لمعالجة المعادن الناضج والخدمات اللوجستية البرية والبحرية المريحة في Cangzhou، فإننا نقدم حلول حوامل الكابلات الشاملة لمشاريع الهندسة والبناء العالمية.

طلب عرض أسعار

اتصل بنا

  • شركة خبي جيتونج لعلبة الكابلات المحدودة
  • +86 18633783188sales@jitongdlqj.com
  • مدينة لانغفانغ، مقاطعة خبي، الصين
  • حقوق الطبع والنشر © 2026 شركة Hebei Jitong Cable Tray Co., Ltd. جميع الحقوق محفوظة.  privacy policy

    اتصل بنا
    واتس اب

    طلب الاستعلام