


Категория: Огнестойкий кабельный лоток
Dimensions (Width × Height, unit: mm):
(1) Height 50 Series: 100×50, 150×50, 200×50, 300×50, 400×50
(2) Height 100 Series: 100×100, 150×100, 200×100, 300×100, 400×100, 500×100, 600×100, 800×100
(3) Height 150 Series: 200×150, 300×150, 400×150, 500×150, 600×150, 800×150, 1000×150
(4) Height 200 Series: 300×200, 400×200, 500×200, 600×200, 800×200, 1000×200, 1200×200
(5) Extra‑long Span / Special Widened Cable Tray for Power Plants: 1000×100, 1000×150, 1000×200, 1200×200
Plate Thickness (unit: mm): 1.0/1.2/1.5/2.0/2.5/3.0/3.5
Ⅰ. Product definition
Продукт представляет собой огнестойкий кабельный лоток лестничного типа, состоящий в основном из двусторонних продольных балок из углеродистой стали Q235 и сварной лестничной конструкции с полыми перекладинами. После формования он подвергается горячему или электрооцинкованию для защиты от коррозии, а затем на него наносится вспучивающееся огнестойкое покрытие. Он поставляется с соответствующими огнестойкими крышками и полным набором огнестойких аксессуаров, сочетающих в себе двойную функцию эффективного рассеивания тепла для сильноточных кабелей и огнестойкости для пожаротушения. Он специально разработан для проектов электромонтажа с требованиями пожарной безопасности, в первую очередь с использованием высоковольтных силовых кабелей.
II. Two Major Product Process Types
1. Conventional Coating Type Ladder Frame Forming: Steel plate bending and edge rolling, ladder rung stamping and full welding, with ladder rung spacing of 150/200/300mm; Base Anti-corrosion: Hot-dip galvanizing treatment, with a zinc coating thickness of ≥65μm, providing a rust-proof base; Fire-resistant Spray Coating: Overall spraying of intumescent fire-resistant coating, followed by drying and curing; F60 fire-resistant dry film thickness ≥0.8mm; F90/F120 dry film thickness ≥1.2~1.5mm; Fire-resistant Principle: Upon exposure to fire at 200/300℃, it expands 5/10 times, forming a honeycomb-like dense carbonized thermal insulation layer, which isolates high temperatures and protects the internal cables from power interruption within a specified time period.
2. Double-layer composite high-fire-resistant model (dedicated for tunnels/shafts) features side panels made of double-layer steel plates, with the interlayer filled with aluminum silicate fireproof insulation cotton. This significantly enhances the heat insulation performance, achieving a fire resistance limit of up to 90/120 minutes, making it suitable for enclosed and high-fire-resistance scenarios.
III. The entire set of supporting fire-resistant accessories undergoes unified fire-resistant treatment, with no fire-resistant shortcomings:
1. Прямые аксессуары: огнестойкие разъемы, огнестойкие болты и заземляющие плетеные перемычки; 2. Детали специальной формы: горизонтальные отводы 90°, горизонтальные отводы 45°, вертикальные отводы вверх-вниз, тройники, крестовины и переходники; 3. Функциональные части: огнестойкие накладки, металлические перегородки и огнестойкие перегородки; 4. Опорная система: огнестойкие опоры, огнестойкие колонны, сейсмостойкие опоры и подвески (обязательно для шахт и тоннелей).
IV. Core Advantages
1. Optimal heat dissipation performance, with a hollowed-out and fully transparent structure suitable for high-current heating cables, ensuring sufficient air convection. Compared to fire-resistant trough-type cable trays, the temperature rise is reduced by 10~15℃, perfectly solving the problem of heat accumulation and aging caused by dense laying of high-voltage and large-section cables.
2. It possesses formal fire resistance performance, meeting fire safety inspection standards. The fire-resistant coating forms a thermal insulation barrier when exposed to fire, ensuring that the cable tray does not soften or collapse during a fire. This guarantees continuous power supply to power cables such as fire pumps, smoke exhaust fans, and emergency lighting. A third-party fire safety inspection report can be provided.
3. The hollow structure features light weight, strong load-bearing capacity, and lower cost, using less material than the fire-resistant trough type, and is labor-saving in lifting and transportation. The double-layer crimping + fully welded ladder rungs provide mechanical stability, and the thickened model can support a uniform load of up to 450kg/m, suitable for centralized laying of heavy-duty high-voltage cables.
4. The wiring maintenance is convenient with an open structure, eliminating the need for frequent disassembly of cover plates. The laying, inspection, and addition or removal of cables are visually intuitive, reducing maintenance man-hours in the later stages.
5. Dual protection against corrosion and fire: The bottom layer is hot-dip galvanized for rust prevention, while the outer layer is coated with a fire-resistant material that is resistant to water, oil, mild acids and alkalis. It can be directly used in damp basements and lightly corrosive workshops.
Ⅴ. Applicable Scenarios:
1. Высоковольтная силовая магистраль для противопожарной защиты электростанций, подстанций, фотоэлектрических/ветряных электростанций; 2. Промышленные предприятия, подземные гаражи и распределительные помещения, где кабели выделяют большое количество тепла и к которым предъявляются требования пожарной безопасности; 3. Линии электропередачи в крупных торговых центрах, больницах и аэропортах, состоящие преимущественно из силовых кабелей; 4. Распределительные коридоры в слабоагрессивных цехах и очистных сооружениях (горячее цинкование + двойная противопожарная защита); 5. Зонирование силового кабеля в тоннелях и инженерных тоннелях (применяется с несущими противопожарными покрытиями).
VI. Key Points of Construction and Installation Specifications
1. All cutting, grinding, and drilling sections should be immediately coated with fire-resistant patching compound to restore the complete fire-resistant and heat-insulating layer;
2. Support arms, columns, and connecting bolts should be uniformly equipped with fire-resistant galvanized parts, and the mixed use of ordinary non-fire-resistant accessories is prohibited;
3. Each section of cable tray should be installed with grounding jumper wires, and repeated grounding should be added to shafts and tunnels to ensure overall equipotential continuity;
4. Metal separators must be installed when laying strong and weak electrical cables in the same ladder; fire-resistant covers should be added throughout the entire process for dust, pipe racks, and shafts;
5. For heavy-duty cable trays with a width of over 600mm, support arm support points should be densified to control deflection and deformation under long-term load;
6. High-rise shafts, tunnels, and long-distance fire main lines should be equipped with seismic support hangers according to specifications; 7. Cable trays passing through walls and floor slabs should be equipped with fire-resistant sealing materials to block the spread of flames and smoke.
Авторские права © 2026 Hebei Jitong Cable Tray Co., Ltd. Все права защищены. privacy policy